Meet the latest improvement of the LED F160! With this new accessory, the LED F160 luminous flux increases from typically 12'000 lumens to 13'800 lumens.
You get 15% more light output!
The increase in performance is achieved by a new diffusion attachment. The new diffusion attachment can be easily distinguished from its predecessor : it has a black ring.
All newly ordered LED F160 units will be shipped with the new diffusion attachment. Best, the recommended sales price (MRSP) remains the same!
Upgrade option
If you already own one or several LED F160 equipped with the former (plastic) diffusion attachment, you can also upgrade your equipment. Simply purchase the new diffusion attachment separately (accessory).
LED F160 lamps fitted with the new diffusion attachment exhibit the same outstanding light characteristics and colour temperature as before, i.e. the two types can be "mixed" without hesitation (using them on the same set).
Important - Necessary firmware update
Existing LED F160 owners that are buying the new diffusor attachment separately must install the latest firmware update (V2.0). LED F160 owners that use the latest bronControl app will also need to install the latest LED F160 firmware, even if they use it with the plastic diffusion attachment. The Firmware update instructions can be found here
When replacing the former diffusion attachment with the new one, the following setting change must also be made in the submenu of the LED F160 unit. This menu entry only exists on the firmware V2.0.
Slightly adjusted power settings:
To ensure that the actual light output accurately corresponds to the output shown in the display, the fine adjustment in the lower power range is now adjusted as follows.
output range |
possible increment |
6.8 and higher |
0.1 |
below 6.8 |
0.2 |
