• Constant colour temperature

Constant colour temperature

The broncolor patented ECTC technology guarantees a constant average color temperature over the entire output range.

ECTC (Enhanced Colour Temperature Control) precisely balances the colder and bluish light at the beginning of a flash discharge with the warmer and reddish light towards the end.

With this unique technology broncolor controls the light output over 11 f-stop at constant color temperature. There is no other technology which compares with this performance. With other technologies such a constant color temperature can only be attained over a maximum of four f-stops. If multiple lamp heads are connected, the constant color temperature is guaranteed on all channels with an asymmetry of up to two f-stops. The color varies by only +/- 50 K over the entire power range.

Even for fast flash sequences, constant color temperature and quantity of light are the primary quality criteria for broncolor products.

High and low power setting (open and closed aperture) with the same color temperature.

with broncolor Technology

 

Without ECTC: The color temperature drops drastically when reducing the power by several f-stops.
 

 

without broncolor Technology
 

Other broncolor technologies

BRON SPEEDMODE 4c POS

Speed Mode

In Speed Mode the charging time and flash duration are reduced by up to
50 %, and the maximum flash energy is reduced by 25%. In this way you can achieve up to ten exposures per second at full output, or up to 50 at reduced power. This makes Scoro and Move power packs the ultimate flash unit wherever speed is of the essence. And with its fan cooling even long flash series are no problem.

Read more

BRON CNTRLRANGE 4c POS

Individual power distribution

The Scoro S has three lamp outlets, the Scoro E and Move power packs have two each. Each lamp outlet has an individual power controller with LED display, which is adjustable independently of the other outlets. The unit therefore behaves like three (or two) independent power packs. You have a choice of up to 11 f-stops to set the flash output you need. That is a control range from 3 to 3200 J.

Read more

BRON FLASHCUTOFF 4c POS

Cut-off technology

Flash duration and light output are the two decisive factors in light control.
A microprocessor in broncolor power packs will calculate for you
the shortest or longest flash duration for a given output. This enables rapid
flash sequences with up to 50 flashes per second.

Read more