产品
Para 133 HR Kit

Para 133 HR Kit

Para is not a conventional light shaper, but rather an independent lighting system

Frequently asked questions

about Para 133 HR Kit

What does "HR" stand for?

"HR" stands for heat-resistant. The Para 88 HR and 133 HR are made from a special fabric which withstands heat produced by broncolor HMI lamps. In addition this material is more reflective and shiny than the material used in normal Paras. Therefore, "HR" Paras should be used either in a completely focused or completely defocused position.

Wofür sind die vier mitgelieferten schwarzen Aufhängungsseile beim Para?

Die Para Lichtformer weisen Metallösen an der Aussenseite des Textilüberzuges auf. An diesen können die mitgelieferten Aufhängungsseile befestigt werden. Sie dienen zur Befestigung eines Para (Leuchte mittels broncolor Bajonett angeschlossen) an Decken bzw. Deckenschienensystemen.

Wichtig:
Bei der Montage eines Para an der Decke muss zwingend das mitgelieferte broncolor Sicherheitsseil (33.503.00) eingesetzt werden.

Ebenso können diese sogenannten Aufhängungsseile dazu genutzt werden, einen Para bei Wind oder bei unebenen Untergründen am Boden abzuspannen (z.B. in Verbindung mit Sandsäcken).

Para 133 HR Kit

The apex zone of Para 133 HR is made of a special heat-resistant material. This enables continuous lighting at up to a maximum of 2000 W output.

It is not just the form and size of Paras that impresses, but above all their unique light quality and phenomenal light output.

Para is not a conventional light shaper, but rather an independent lighting system: various sizes of reflector are available; the position of the lamp is always central, on the axis of the reflector; the angle influences the character of the light; the range includes three diffusers with different densities as well as honeycomb grids.

Para 133 HR Kit

33.550.06

厂商建议零售价 | 不包括当地税项

4,054.00 EUR

- max. 2000 W
- f-stop at 3 m (9 8/10 ft) distanced (HMI FT1600), focused 11 4/10
- f-stop at 10 m (32 8/10 ft) distanced (HMI FT1600), focused 4 4/10
- lux at 3 m (9 8/10 ft) distance (HMI FT1600), focused: 24500 lx
- lux at 10 m (32 8/10 ft) distance (HMI FT1600), focused: 3500 lx
- silver inside coating
- dimensions open (without stand) Ø 120 x 77 cm (30 x 47”)
- dimensions closed Ø 102 x 20 cm (8 x 40")
- weight 6.9 kg (15.2 lbs)

includes:
1 Para 133 HR reflector
4 suspension cable for Para
1 safety cable
1 focusing device for Para 88/133
1 focusing tube F133
1 tilt head to Para 88-222
1 Flash Bag 2 without inlay
1 Accessory Bag
1 mounting instructions