Move 1200 L

- broncolor RFS 2.1 system:

• RFS 2.1 Transceiver (Transmitter kit) | item number 36.133.00

- broncolor RFS 2.2 system:

• RFS 2.2 C Transmitter (Canon) | item number 36.160.00
• RFS 2.2 F Transmitter (Fujifilm) | item number 36.163.00
• RFS 2.2 N Transmitter (Nikon) | item number 36.161.00
• RFS 2.2 S Transmitter (Sony) | item number 36.162.00

It comes with a 87.1 Wh / 14.4 V / 6.6 AH Li-FePo4 battery with integrated battery status (item number: 36.152.00).

All Move power packs support the broncolor HS function if they have the software version 48.07 or later. Move software updates must be done by an authorised broncolor Service Centre. While working in HS mode you are only able to use flash power level 6 to 10. Further, please note that broncolor HS for Move is optimized for the use with one lamp. If HS is activated only lamp channel 1 is active.

In addition, the broncolor RFS 2.2 transmitter is needed, which is available for Canon, Fuji, Nikon and Sony cameras.

No, it does not.

No, it cannot.

Yes, with the following restriction:

Move 1200 L does not offer the modelling light function in combination with
- Pulso G
- Pulso Twin
- Unilite
- Picolite
- Ringflash C
- Striplite
- Boxlite
- Litestick (does not provide modelling light in general)

MobiLED does offer modelling light with Move 1200 L.

Activating the broncolor HS function has a small influence on colour temperature.
However, other light sources such as daylight or ambient light usually have a stronger impact on colour temperature.
Hence, the broncolor HS function’s influence on colour temperature is alleviated in sunny conditions.
HS is meant to be used in a bright outdoor environment.

Without HS, the minimal flash duration cannot be shorter than the fastest shutter speed of the camera (X-sync).
The broncolor HS function provides a way to circumvent the restriction imposed by the X-Sync time:
1) The flash fires before even one pixel of the image sensor has been uncovered
2) The first shutter curtain starts to open.
3) The second shutter curtain starts to close (think of it as a scanning procedure).

The flash continues to burn (like a continuous light) and only stops when the scanning procedure is complete. For this reason we need the longest possible flash duration. The result is a great feature; now you can use a large aperture to provide an out-of-focus background, or simply freeze super-fast motions.

While working in HS mode you are only able to use flash power level 4 to 10 with Siros L.
While working in HS mode you are only able to use flash power level 6 to 10 with Move 1200L.

In general – under the same lighting conditions (i.e. ambient light) – the broncolor HS function does not impact battery life.

RFS 2.2 is available in three versions, for Canon, Nikon and Sony, always optimized for its operation.
The use with other camera systems is not recommended.
The RFS 2.1 transmitter is a more universal device, hence able to work with many camera makes other than Canon, Nikon or Sony.
Please note that with the RFS 2.1 the broncolor HS function is not supported.

Under studio (“interior”) conditions, a certain degree of brightness gradation (from top to bottom) may occur. This effect varies depending on the camera model.
Outdoors in bright sunlight – the ideal environment for the broncolor HS function – the mentioned brightness gradation is neglectable.